RDN's Heavy-Duty Belt Pullers are built with heavy, welded steel and bolted construction. Each machine features totally enclosed belt guards, an emergency stop button, and safety stickers for safe operation. Removable panels and hinged doors allow easy access for inspection and maintenance. Adjustable height jack screws and swivel casters are also provided.
Two Belt Pullers Provide Maximum Pulling Force
Utilizing non-marking poly "V" belts, these Heavy-Duty Belt Pullers are designed to provide balanced loading for belt closing, so that higher closing forces can be achieved. A pressure regulator with gauge is also included for setting the belt closing force. Lubricated-for-life, sealed ball bearing rollers (located between the drive and take-up pulleys on each belt assembly) ensure maximum contact with the extrudate.
The top take-up frame is supported by brackets on each side of the frame at both ends of the machine. This design provides balanced loading for belt closing creating higher closing forces.
Four Belt Pullers Are Ideal for Pipe Applications
The top belt assembly and horizontal assembly on the backside of the machine are pneumatically actuated. Since all belts close independently the machine will operate in the following modes: 2-belt vertical puller, 2-belt horizontal puller or 4-belt puller. Lubricated for life sealed ball bearings rollers between the drive and take-up pulleys on each belt assembly assures maximum contact to the extrudate.
Specifications
Number of Belts
4
Belt Drive
3 HP A.C. Vector Drive Optional: 5 HP A.C.
Belt Height
42" ± 2"
Maximum Belt Opening
12 in
Belt Contact Length
40 in
Belt Width
3 in
Belt Speed
Customer Specified
Power Supply
208 to 230 V / 3 Ph / 60 Hz Optional: 460 V / 3 Ph / 60 Hz
Floor Dimensions (Length)
84 in
Floor Dimensions (Width)
52 in
Industries Served
Industries Served
Custom Pipe Housing and Construction Retail
Note
A wide variety of options are available. Specifications subject to change without notice.
