For rigid and semi-rigid, 2" max. O.D. tubing and profiles, with up to 3" x 6" cross sections. High-speed performance with line speeds up to 25 FPM.

Chop-Cut Saws: 25 Cuts per Minute!
  • Table glides on precision-finished rails and linear motion bearings to ensure smooth travel and increased bearing life. Additional bearings assure table stability.
  • Air powered, small saw table provides increased cut speed and capacity.
  • Blade travel is smooth, operated with adjustable flow valves to control travel speed. Hydraulic shock absorber cushions return of table.
  • Adjustable, polyurethane-faced pneumatic clamps assure positive hold on extrudate.
  • Fully guarded operation. Manual cut push button.
  • Product counter.
  • Chip pan for particle collection.
Unit of Measure

Features

INTELLICUT® Servo Option

N/A An advanced servo option produces typical off-line cutting tolerances on-line, eliminating off-line cutting costs. Productivity zooms.

RDN servo saws can contribute to both quality and productivity improvement. By improving cut-length tolerances, you reduce scrap and eliminate the need to re-cut off-line. Set-up time is also reduced because the operator doesn't have to set saw table speed since the table follows the extrudate. This also means that throughout the extrusion run the saw table is always in sync with the extrudate. The servo controller cams the table travel to the product encoder ensuring real time cut length accuracy.

Cut length tolerance of a traveling saw with industry -standard pneumatic operation for the table motion is often ±0.125 in. or greater. A tolerance range of ± 0.015 in. is achievable with RDN's advanced servo option.

Fully Featured Saws

N/A In addition to being tough and ultra-reliable, all RDN saws are designed to maximize safety, precision, and productivity:
  • All RDN saws feature fully guarded operation, as well as chip pans to collect the particulate generated during cutting, keeping work areas safe and clean.
  • Smooth table travel with minimum vibration is provided by precision-finished in-line rails and linear motion bearings.
  • Chop-Cut Saws have adjustable, polyurethane-faced pneumatic clamps to assure positive hold on the extrudate.

Specifications

Cutting Capacity

N/A 2" H x 4" W 2" Tube

Saw Blade Diameter

N/A 10 in

Center Line Height

N/A 42" ± 2"

Power Supply

N/A 230-460/3/60

Table Travel

N/A 18 in24 in

Motor

N/A 1.5 hp

Air Supply

N/A 60 to 80 psi

Industries Served

Industries Served

N/A Custom Pipe Housing and Construction Retail

Note

Note

N/A A wide variety of options are available. Specifications subject to change without notice.